The KW Variant 1 “inox-line” coilover kit is our entry model for increased driving pleasure with an attractive and individually adjustable lowering. Due to its high-quality finish, the use of struts made from stainless steel, corrosion resistant springs and bump stops as well as compatible components stands for long driving pleasure – not just the car’s life.
With the KW Variant 1 coilover you can achieve maximum lowering in the TÜV-tested adjustment range. Depending on the vehicle model variance ranges between 30 to 70mm or 50 to 90mm. Even after years of use you can easily adjust the height due to the dirt resistant trapezoid thread and composite collar. Lowering at the front axle is made using our one piece composite height adjuster, on the rear axle this is the same unless the car has a seperate spring and shock absorber. The supplied rear height adjuster sits either above or below the rear spring.
The benchmark for tuning fans
KW Variant 1 “inox-line” coilover satisfies the sporty driver with its harmonic basic setup. For each vehicle our engineers develop a specific damper setup and spring rate to increase the driving pleasure with optimal balance of sportiness and practicality. In the end, you are not just buying any coilover, but a KW coilover which has been developed specifically for your particular vehicle. As a manufacturer , KW uses only its own resources, high quality components , and the same damper technology as high-volume manufacturers. With the KW coilovers Variant 1 “inox-line”, rolling motions of the body will be reduced during compression giving you the benefit of genuine directness and sportier handling while driving.
Trust In Our Experience
We are the market leader and innovator of individual suspension solutions for road and racetracks for more than 15 years. Car drivers, automotive manufacturers , and tuners all around the world rely on our KW coilovers “Made in Germany”. Each KW coilover kit, developed and manufactured in the Swabian town Fichtenberg, is subject to extensive stress tests during production to meet the high standards of our KW quality management. As a German manufacturer we give a 2-year warranty on our more than 4600 applications suspension solutions, which exceed OEM quality. The warranty increases up to 5 years when the kit has been installed at one of our KW specialist dealers.
Sporty and comfortable dampening technology
Stainless steel technology “inox-line”
Individually height adjustable
TÜV-tested adjustment range
Ready to install complete solution
High quality components for a long durability
Complete documentation for easy handling
Setup – Factory pre-configured damping setup
The KW Variant 1 “inox-line” coilover has a vehicle-specific, fixed configured damper setup. The spring and damper match perfectly, allowing you to experience an optimized balance of sportiness and comfort while driving.
Even with full load and maximum axle loads, the dampers always work with a sporty characteristic. Tuning fans whose focus are “Show & Shine” events are interested in the KW Variant 1 “inox-line”.
KW Variant 1: Sporty – Balanced. With KW factory pre-set dampening.
The ideal system for customers who like to choose the customer lowering of their vehicles while counting on the extensive driving tests of our experienced engineers who have preset the dampers for the ultimate balance between sporty driving, comfort and safety.
KW Coilover Kit V1 Mazda Miata NB and Exomotive Exocet.
Front Lowering: 1.2″ to 2.3″
Rear Lowering: 1.2″ to 2.3″