Exomotive Exocet Pricing
Exocet Base
- Chassis ready to bolt on to your Miata drivetrain
- 3-point seatbelt mounts
- Laser-cut Aluminum floors with pilot holes
- Laser-cut Aluminum Front & Rear Bulkheads
- Laser-cut & CNC bent Transmission Cover
- Smoked Polycarbonate Side Panels and S/S Hardware
- Nuts, Bolts, Rivets, Screws, and P-Clips
- 3/16″ Cunifer Alloy Brake Pipe
- Premium Vinyl Edge Trim
- Fiberglass Nose, Fuel Tank Cover, and Gauge Mount
- Online Build Guide
Exocet Sport
- Chassis ready to bolt on to your Miata drivetrain
- Designed for 4, 5 or 6 point harnesses
- Laser-cut Aluminum floors with pilot holes
- Laser-cut Aluminum Front & Rear Bulkheads
- Laser-cut & CNC bent Transmission Cover
- Smoked Polycarbonate Side Panels and S/S Hardware
- Nuts, Bolts, Rivets, Screws, and P-Clips
- 3/16″ Cunifer Alloy Brake Pipe
- Premium Vinyl Edge Trim
- Fiberglass Nose, Fuel Tank Cover, and Gauge Mount
- Online Build Guide
- Roll bar exceeds SCCA/NASA/FIA/MSA requirements
- Continuous driver diagonal roll bar tube
- Harness mounting tubes
- Additional front and rear downtubes
Exocet Race / Off-ROad
- Chassis ready to bolt on to your Miata drivetrain
- Designed for 4, 5 or 6 point harnesses
- Welded-in 18 gauge steel floors
- Laser-cut Aluminum Front & Rear Bulkheads
- Laser-cut & CNC bent Transmission Cover
- Smoked Polycarbonate Side Panels and S/S Hardware
- Nuts, Bolts, Rivets, Screws, and P-Clips
- 3/16″ Cunifer Alloy Brake Pipe
- Premium Vinyl Edge Trim
- Fiberglass Nose, Fuel Tank Cover, and Gauge Mount
- Online Build Guide
- Roll bar exceeds SCCA/NASA/FIA/MSA requirements
- Continuous driver diagonal roll bar tube
- Harness mounting tubes
- Additional front and rear downtubes
- Passenger diagonal roll bar bracing
- Single-piece main forward cage tubes
- Tube-gusseted halo
- Gusseted dashboard-level tie-in
Exomotive Exocet Specifications
Length: 132 inches
Wheelbase: 89.2 inches
Width: 68.4 inches
Height: 47 inches
Weight: 1400-1700 pounds (varies depending on options)
Power: 100-700hp
Optional Extras
RAL color system Gelcoat upgrade – $265
Dominator Headlights – $150/pair
Front CoT/NLR/Universal Wing Mount – $250
Front NLR Exocet Wing – $626.40
Rear CoT Wing Mount – $200
Rear APR/NLR Wing Mount – $200
Rear APR GTC-200 Exocet Wing – $923.40
Rear NLR Exocet Wing – $694.44
Aluminum wiring tray – $150
Fiberglass Fenders & Mount Kit – $865 (when purchased with kit)
Chassis Media Blasting and Powder Coating – $700+ (Depends on color/finish. Over 6500 colors available.)
As of October 2025, current Exocet kit lead time is approximately 8-9 weeks. Made in the USA at our Atlanta, GA facility. Non-powder coated kits ship LTL Freight with $415 crating fee plus actual freight cost and quotes range from $400-1100 depending on your location. Exocet kits that are powder coated and/or sent to a residential address ship via our specialty carrier, Cunningham Transport. Please contact us for a specific quote.
Exocet Base
Exocet Sport
Exocet Race Off-Road
Exomotive Takes the Mazda Miata to the Next Level.
– Evan Perkins, Turnology
How to Order an Exocet
Ordering the Exocet is easy and can be completed online by submitting an Exocet order form and sending in your deposit. You’ll immediately be entered into the build queue and we’ll get started building your Exocet kit. The remaining kit balance will be due one week prior to pickup or kit shipment.
1. Fill out the Exocet Order Form
Specify your contact and shipping details along with model selection and desired options on the Exocet Order form.
2. Submit your $2000 Deposit
Submitting your deposit fortifies your position in our build queue and begins your Exocet build. We accept checks, credit cards, PayPal, Apple Pay, and wire transfers.