AMP EFI MaxSpark PNP Ignition Kit for Exocet


MaxSpark PNP – the ultimate Miata engine ignition system upgrade!

SKU: N/A Categories: ,


AMP EFI put together the best and most powerful ignition upgrade kit available for your 1990-2005 Mazda Miata BP engine-powered Exocet, and it’s a complete drop-on affair. MaxSpark is next level with likely double the spark energy of previous DIY Miata Coil-on-Plug conversions.

This is a full, plug and play solution to add incredibly strong ignition to your Mazda Miata. Owners of this kit report benefits such as elimination of misfire due to spark blow out, smoother idle, better throttle response, and more power. This ignition is hot enough for any engine modifications you have planned; naturally aspirated or forced induction, high compression, turbo, supercharged and nitrous. Crank the boost on that turbo Miata engine; we’ve got spark covered.

Package includes everything you need — Plug and play harness, ignition coils, plug wires, bracket, hardware, and high quality installation guide is included.

The kit utilizes the AMP EFI IGN1A smart ignition coils that produce over 100mj (nearly 2X more energy than the leading competitors) per spark event.

The high quality, plug and play harness features OE-grade connectors, techflex flame retardant loom, and TXL high temp automotive grade wire. All wires are color coded. Coil connectors are labeled with custom printed heatshrink to help you install it right the first time.

Wiring harness is designed to be tucked for a professional and appealing look when installed. But it’s so dead sexy you might not want to hide it!

A top of the line, waterproof automotive grade relay and fuse allow for minimal voltage drop. Both 12V power and ground connections to the coils are greatly improved over the original factory wiring. This allows for much less voltage drop, thus much better ignition performance. The ignition high current is routed though this new relay, instead of through the OE main relay. This should increase reliability of the main relay, a common failure point in the NA and NB Miata, especially when driven hard. The included custom coil bracket is powdercoated and will fit virtually any Mazda B6 or BP series engine, including the VVT engine!

Coils can be triggered by factory style wasted spark, and provisions are included for sequential coil-per-plug control (requires running 2 wires and an aftermarket PCM cable of sequential ignition).

If you have been wondering what the best coil on plug conversion ignition system is for your Supercharged Exocet or Turbo Exocet, the pinnacle of Miata BP engine Performance Ignition, you’ve found it.

Available Models (select vehicle year in drop down menu):
*MM9093 — Fits 1990-1993 Miatas. Will fit non USDM 1.6 NA Miatas through 1997.
*MM9400 — Fits 1994-2000 Miatas. Yes, both NA8 and NB1.
*MM0105 — Fits 2001-2005 Miatas, both VVT engines and Mazdaspeed / MSM.
*DIY Crimp Kit — This kit includes the coils, bracket, plug wires, and a “flying lead” version of our harness. This allows easy integration with your custom engine wiring harness, instead of using the factory coil wiring. You will need to wire ignition switched 12V (to trigger the new relay) and the ignition coil trigger wires.

Note: 1990 through early 1995 Miatas have ignition module coil driven tachometers. On these years, the MaxSpark kit does not use the stock module, and therefore does not have tachometer drive capability. Using this kit on 1990 through early 1995 Miatas requires a standalone ECU. We believe that most users of this product will have a standalone ECU and/or aftermarket dash anyway. This is not a concern in 1995.5 and newer Miatas.

Additional information

Model Year

1990-1993, 1994-2000, 2001-2005 & MSM, DIY Crimp Kit


There are no reviews yet.

Be the first to review “AMP EFI MaxSpark PNP Ignition Kit for Exocet”

Your email address will not be published. Required fields are marked *