Getrag Exocet Driveline Kits – LFX


Add a Getrag differential to your LFX-swapped Exocet.

SKU: N/A Category:


The Getrag carrier is widely used in many GM vehicles with a broad range of power outputs and applications. This is our go-to differential for LFX V6 Exocet builds due to it’s lightweight cast aluminum design and clutch-type limited slip. It is also available in an assortment of ratios listed below. The size of the carrier offers clearance for dual 3″ exhausts and optimizes ground clearance. Stage 1 kits are suited for up to 400whp builds and are designed to work with the factory hubs. Stage 2 (500hp) kits include upgraded billet hubs with ARP studs.

Kits include:
-Axles (Stage 1 or 2)
-Differential mount
-Drive shaft for selected transmission or without drive shaft for custom applications/alternative transmissions.

Please note – because of the large number of axle combinations, axles are built to order. Lead times vary, but typically run 2-3 weeks.

G80 Series Limited Slip Availability and GM Part Numbers

3.23 : GM Part Number 25978162
Available in the following vehicles, RWD only
2005-2007 CTS Base 3.6L
2008-2009 SRX base 3.6L and 4.6L
2009 STS Base and Platinum 3.6L

3.42 : GM Part Number 25873500
Available in the following vehicles, RWD only
2006-2007 CTS Base 2.8L and 3.6L
2005-2006 STS Base 3.6L

3.73 : GM Part Number25873497
Available in the following vehicles, RWD manual transmission
2006-2007 CTS Base 2.8L or CTS-V
2006-2007 CTS-V 6.0L

3.91 : GM Part Number 25968531
Available in the following vehicles:
2006-2009 Pontiac Solstice, Base and GXP
2009-2010 Saturn Sky Base and Redline

Additional information


Stage 1, Stage 2


28 Spline, 31 Spline

Drive Shaft

MV5 Transmission, MV7 Transmission, No Drive Shaft


No, Yes


There are no reviews yet.

Be the first to review “Getrag Exocet Driveline Kits – LFX”

Your email address will not be published. Required fields are marked *